I have been an active OpenBSD developer for more than 15 years. Most of the work I've done has ended up being commited to the master repository.
However, incomplete or unpolished works may sometimes be found here until they are ready to hit the tree. You'll find also some tips and other random bits, and sometimes experimental kernels for some platforms.

I have also started to tell (hopefully) interesting OpenBSD stories, from an insider point of view, and intend to write more of them as time permits.

For the curious people out there, here is a short (and incomplete) list of my OpenBSD achievements:

• Porting to new (well, previously unsupported) hardware
  • Ported to AViiON systems. This port is no longer supported in OpenBSD.
  • Ported to the Lemote Fuloong, Lynloong and Yeelong systems, as well as the Dexxon Gdium Liberty (loongson port).
    Files: about everything in sys/arch/loongson/
  • Added multiprocessor support (SMP) to the mvme88k port.
  • Fixed the mvme88k port codebase to run reliably on 88110-based systems.
  • Ported to the Octane and Origin/Onyx families of Silicon Graphics workstations and servers (including Fuel and Tezro) (part of the sgi port). This required writing several specific device drivers (XBow-PCI bridge, IOC3 and IOC4, Ethernet ...)
    Files mainly: sys/arch/sgi/dev/if_iec.c, sys/arch/sgi/dev/if_iecreg.h, sys/arch/sgi/dev/owmac.c, sys/arch/sgi/dev/owmacvar.h, sys/arch/sgi/dev/owmem_subr.c, sys/arch/sgi/dev/owmem_subr.h, sys/arch/sgi/dev/owserial.c, sys/arch/sgi/dev/owserialvar.h, sys/arch/sgi/pci/ioc.c, sys/arch/sgi/pci/iocreg.h, sys/arch/sgi/pci/iocvar.h, sys/arch/sgi/pci/iof.c, sys/arch/sgi/pci/iofreg.h, sys/arch/sgi/pci/iofvar.h, sys/arch/sgi/sgi/ip27.h, sys/arch/sgi/sgi/ip27_machdep.c, sys/arch/sgi/sgi/ip30.h, sys/arch/sgi/sgi/ip30_machdep.c, sys/arch/sgi/sgi/l1.c, sys/arch/sgi/sgi/l1.h, sys/arch/sgi/sgi/sginode.c, and almost everything in sys/arch/sgi/xbow/
• Extending existing hardware support to new machine families
  • Added Alpha DS15/DS25/ES45 (Titan) system family support, as well as environmental exception handling (chassis alarms) to the alpha port.
    Files: mainly sys/arch/alpha/alpha/dec_6600.c, sys/arch/alpha/include/logout.h
  • Ported to the MVME141 and MVME165 systems, as part of the mvme68k port.
    Files: mainly sys/arch/mvme68k/dev/lrc.c, sys/arch/mvme68k/dev/lrcreg.h, sys/arch/mvme68k/dev/ofobio.c, sys/arch/mvme68k/dev/ofobioreg.h
  • Ported to the VAXstation 3520 and 3540 (Firefox) VAX systems.
    Files: sys/arch/vax/dec/sii.c, everything in sys/arch/vax/mbus/, sys/arch/vax/vax/ka60.c
  • Ported to the VXT2000+ VAX-based X-terminal.
    Files: sys/arch/vax/vax/vxt.c, everything in sys/arch/vax/vxt/
• Device drivers
  • Wrote arcofi, a driver for HP Audio1 device, found on HP 9000/425e (only audio-capable hp300 system) and various early PA-RISC systems.
    Files: sys/dev/ic/arcofi.c, sys/dev/ic/arcofivar.h, and the attachments interfaces sys/arch/hp300/dev/arcofi_dio.c for hp300 and sys/arch/hppa/gsc/arcofi_gsc.c for hppa.
  • Added SGC bus support to the hp300 port.
    Files: sys/arch/hp300/dev/sgc.c, sys/arch/hp300/dev/sgcreg.h, sys/arch/hp300/dev/sgcvar.h, sys/arch/hp300/dev/sti_sgc.c
  • Wrote tvrx, a driver for the Tigershark PersonalVRX hp300 frame buffer.
    File: sys/arch/hp300/dev/tvrx.c
  • Wrote dnkbd, a driver for the Apollo keyboard and mouse, used by the hp300 port.
    Files: sys/arch/hp300/dev/dnkbd.c, sys/arch/hp300/dev/dnkbdmap.c, sys/arch/hp300/dev/dnkbdmap.h
  • Rewrote the HIL subsystem for the hppa port. This subsystem is also used by the hp300 port.
    Files: sys/arch/hp300/dev/hil_intio.c, sys/arch/hppa/gsc/hil_gsc.c, everything in sys/dev/hil/
  • Wrote gsckbc, a driver for the PS/2 keyboard and mouse port found on most PA-RISC systems.
    Files: sys/arch/hppa/gsc/gsckbc.c, sys/arch/hppa/gsc/gsckbcreg.h
  • Wrote vsbic, a driver for the MVME327 SCSI controller for the mvme68k and mvme88k ports.
    Files: sys/arch/mvme68k/dev/vsbic.c, sys/arch/mvme88k/dev/vsbic.c (they are almost identical and were supposed to eventually merge)
  • Wrote drivers for many SPARC SBus frame buffers, such as Fujitsu AG-10e (agten), Sun/Matrox cg12 (cgtwelve), Southland Media Systems MGX/MGX+ (mgx), VITEC RasterFlex (rfx), Parallax XVideo and PowerVideo (tvtwo), Vigra VS10/11/12 (vigra), used by the sparc and sparc64 ports.
    Files: mainly sys/dev/ic/atxxreg.h, sys/arch/sparc/dev/cgtwelve.c, sys/arch/sparc/dev/cgtwelvereg.h, sys/arch/sparc/dev/mgx.c, sys/arch/sparc/dev/rfx.c, sys/arch/sparc/dev/tvtwo.c, sys/arch/sparc/dev/vigra.c, and their sparc64 counterparts sys/dev/sbus/cgtwelve.c, sys/dev/sbus/cgtwelvereg.h, sys/dev/sbus/mgx.c, sys/dev/sbus/rfx.c, sys/dev/sbus/tvtwo.c, sys/dev/sbus/vigra.c
  • Wrote tslot, a driver for the PCMCIA bridge found in Tadpole's SPARCbook 3 systems.
    File: sys/arch/sparc/dev/ts102.c
  • Wrote ifb, a driver for the Sun Expert-3D cards (with the help of Mark Kettenis).
    File: mainly sys/arch/sparc64/dev/ifb.c
  • Wrote gpx, a driver for the VAX low cost color option frame buffer found on VAXstation 3100 systems.
    File: mainly sys/arch/vax/vsa/gpx.c
  • Added audio support to the VAXstation 4000 series (VLC, /60 and /90).
    File: sys/arch/vax/vsa/vsaudio.c
  • Extended the sti frame buffer driver to support PCI models.
    File: sys/dev/pci/sti_pci.c
• Other work
  • Led the integration work of the stack-smashing protector (propolice), written by Hiroaki Etoh, in the OpenBSD system, enabled by default. This involved many testing cycles on all supported platforms, changes to the a.out ld.so, writing a stack smashing handling routine in libc. Although this work was started by Federico G. Schwindt, most of the bugs affecting other platforms than the mainstream i386 (amd64 did not exist back then...) were found by Hiroaki Etoh and me on my systems.
  • Wrote code to be able to switch console path in the hppa port bootloader (allowing models 712 to be configured for serial console despite the PROM not allowing this).
    File: sys/arch/hppa/stand/libsa/cmd_hppa.c
  • Designed and implemented a low-overhead workaround for R4000 infamous end-of-page errata, allowing SGI Indigo (and some early Indy) to run multiuser, stably.
    Files: mainly sys/arch/mips64/mips64/r4000_errata.c, which comments detail the design and implementation.
  • Made the kernel terminal emulation code (wscons) handle failure from frame buffer drivers, and keep enough state to be able to restart failed update operations after a short while. This need arised when the USB DisplayLink (udl) driver was introduced, due to command FIFO limits in the device.
    Files: wsemul* in sys/dev/wscons/, where struct wsemul_abortstate is involved (see wsemulvar.h for an explanation of its operation).